7 Best Welder for Beginners to Start Welding in 2020

If you are planning to start a career on welding or looking to find the best welder to start your journey then, Congratulations! You’ve found the best page on the internet to guide you. After this, you will know about various types of welding mechanisms, welding paths, and will be able to choose the perfect welder for you to start your journey on this amazing and diversified world of welding. 

So, without further due let’s get started with the best welder for beginners that you can get in 2020. While choosing the welders we have taken into consideration the versatility of the welder, performance and not to mention the price. We have picked seven of the best welders for you to check out if you are willing to enter this welding industry.

Best Welder for Beginners in 2020

In a Hurry?

Here’s a quick preview of our pickups along with our expert reviews.

Best Overall Welder

Weldpro Digital Tig ACDC 200GD

Best Valued Welder

Primeweld TIG225x AC/DC TIG Welder

Best Multiprocess Welder

ESAB Rebel EMP 215ic

Welder's Choice

Vulcan OmniPro 220

Everlast PowerTig 185DV

APH AlphaTig 200x

Forney Easy Weld 140 MP

1. Weldpro Digital Tig 200GD- Best Overall

At number one on our review list of the best welder for beginners, we have the Weldpro Digital TIG 200GD. This is a fantastic welder and by far one of the best cost-effective welders you can have in the market. This is a perfect entry-level welder for the beginners who are willing to take welding as a profession in the future.

Weldpro_Digital_Tig_ACDC_200GD

It has a wide 30% to 70% AC balance and a 2T/4T TIG torch with a nice trigger. The pedal is quite heavy as it has a thick base metal so it won’t just runoff from the surface. This is quite a nice 120AMPs edition for under a thousand bucks which can easily handle 6011, 7014, and 7018 wire electrodes. 

The Weldpro Digital TIG is capable of thin metal stick welding and it can weld ⅛ inch mild steel and cast iron with ease. It comes with 2 years of warranty out of the box but you can easily upgrade it to 4-5 years with some extra bucks. Overall it is a great welder for beginners to recommend. 

Key Feature & Specifications

  • Dimensions: 17.6 × 7.9 × 16 inches
  • Weight:  61 Pounds
  • Input Power: 110V/240V @ 50/60 Hz
  • TIG AMP Range: 5-200A
  • Stick AMP Range: 20-180A
  • Post Flow: 0-15 Second
  • Up Slope: 0-10 Second
  • Down Slope: 0-25 Second
  • Output Current: 
  • Duty Cycle: 40% on DC, 60% on AC
  • Warranty: 02 Years.

Pros

  • Cost-effective and a beginner-friendly welder
  • Suitable for professional and DIY projects
  • Easily adjustable panel and a fast start-up
  • Has the advanced pulse arc capabilities
  • Comes with a well-designed foot pedal
  • In build slope functionality.

Cons

  • Not suitable for stick welding
  • Not ideal for 110v welding

2. Primeweld TIG225x – Best Valued

Coming up at the runner-up position on our list of the best welder for beginners is the Primeweld TIG225x. This is a great welder to weld stainless steel, cast iron, Aluminum, and other thinner metals. It can easily weld up to ¼ inch aluminum and ¾ inch mild steel and other thicker materials.

Primeweld_TIG225x_ACDC_TIG_Welder

With a variety of sloping functions and a multi 110 volt or 220-volt input function, it is a 6013 and 7018 electrode rod welding capable welders. The only down part of the Primeweld TIG225x is the foot pedal. The pedal doesn’t go with the style of the welder.

It is also a great welder for a plasma cutter that can be used to clean-cut 5×10 sheets of plates. The Primeweld TIG225x is a cost-effective and safer option if you are coming from a MIG welding and Stick welding career. The welder comes with 3 years of warranty out of the box and an option to upgrade it further. Overall is one of the best welders for beginners and you can definitely check it out if you are interested in TIG.

Key Feature & Specifications

  • Dimensions: 24 × 19 × 12 Inches
  • Weight: 90 Pounds
  • Input Power: 110V / 220V
  • Post Flow: 10-90%
  • AC Balance: 30-70%
  • UP Slope: 0-10 Second
  • Down Slop: 0-25 Seconds
  • Output Current: 220V @ 50 AMP
  • Duty Cycle: 40%
  • Warranty: 03 Years.

Pros

  • Easy setup and swift startups.
  • Capable of welding 6013 and 7018 electrode rods
  • Improved foot paddle included.
  • Good up and down slopping functionality
  • Comes with standard 17 flex head cups.

Cons

  • Uncomfortable foot paddle
  • Low duty cycle

3. ESAB Rebel EMP 215icBest Multi process Welder

At number three on our list of the best welder for beginners, we have one of our finest picks that is capable of MIG, TIG, and Stick welding is the ESAB Rebel EMP 215ic. It is a great multi-purpose welder to start with and have a great career around it. 

ESAB_Rebel_EMP_215ic

The ESAB Rebel EMP 215ic is a true multi-process beginner welder with capabilities of MIG, Stick, Lift TIG and Flux-cored Arc welding. It burns ⅛ inch 6010 and 6013 electrode rods with molten metal smoothly and efficiently at 120AMPS. With the 200AMP output, you can get every possible industrial level welding with this machine.

The welder comes with 3 years of official warranty and with a MIG gun, earth clamp, TIG Torch, and an electrode holder right out of the box. Overall it’s a great futuristic welder that will serve for a long time to a beginner in the long run and make the welding process smoother.

Key Feature & Specifications

  • Dimensions: 17.68 × 7.8 × 13.66 Inches
  • Weight: 41 LBS
  • Input Power: Flexible 120V – 230V @ 50/60 Hz
  • Voltage Range: 10-26 Volt
  • Output Current: 250A/30V
  • Wire Speed: 1.5-12 m/Min 
  • Duty Cycle: 205A @ 25%, 150A @ 40%, 125A @ 40% and 110A @ 100%
  • Efficiency: 84%-86%
  • Warranty: 03 Years

Pros

  • Multiprocessing capabilities, MIG/MMA and life/TIG (EMP)
  • Large 11 cm user interface
  • Portable, Single person carry design
  • High-Grade cast aluminum wire-feed drive system
  • Professional grade accessories
  • Beginner-friendly and easy to operate.

Cons

  • It’s a DC only welder, no AC support
  • Doesn’t do plasma cut
  • Doesn’t come with a foot pedal.

4. Vulcan OmniPro 220- Welder’s Choice

If you are looking for a multi process welder with a decent price tag on it then the Vulcan OmniPro 220 is might be the perfect choice for you. That is why it’s in the fourth spot on our list of the best welder for beginners. This welder has both 120V and 220V input which is proven to be a great versatility for the new welders. The welder can weld ⅛ inches 24 gauge steel, and ⅜ inches aluminum other thicker metals.

Vulcan_OmniPro_220

The Vulcan OmniPro 220 is a great multi process welder with the capability of MIG, TIG, Stick, Flux-core welding. It has 132 preloaded welding programs on 4.3 inches (10.92 cm) digital LED display with dial-in settings which is a welcome addition for the beginners and the entry-level welders.

This welder has a lot of accessories included such as a 10 feet 180A MIG welding gun, gas and gas nozzle, work cable and ground clamp, 200A electrode holder, a 6 feet (1.83 m) hose, MIG wire, drive roll and all. This means once you buy the Vulcan OmniPro 220 you won’t have to spend a single cent on any other for it. Overall it’s an excellent choice of welder for the beginners, and we highly recommend you check this one out.

Key Feature & Specifications

  • Dimensions: 17 × 12 × 21 Inches
  • Weight: 49 LBS
  • Input Power: 120V or 240V
  • Voltage: 78V
  • Wire Speed: 50-500 inch per minute
  • Wire Size: 0.025 – 0.045 Inches
  • Output Current: 30-240 Volt
  • Output AMPs: 30A 
  • Duty Cycle: 25% – 40%
  • Warranty: 03 years

Pros

  • Suitable for MIG, TIG, Stick and Flux-cored welding
  • Lightweight and compatible for day to day welding
  • Easy setup and beginner-friendly interface.
  • 132 preloaded welding programs
  •  Dual voltage control technology for a better welding experience
  • Enabled memory feature and futuristic welding setting

Cons

  • Not ideal for industrial level heavy projects
  • Low Duty cycle
  • Expensive compared to other similar grade welders

5. Everlast PowerTig 185DV

At number five we have the Everlast PowerTig 185DV on our list of the best welder for beginners. This is smooth and easy to use a welder for the beginners with decent size and a compact body. The welder is capable of welding ¼ inches of metal thickness on a single press on aluminum and ⅝ inches on steel and molten metal.

Everlast_PowerTig_185DV

It is a lightweight and easily portable machine with a 35% duty cycle. The Everlast PowerTig 185DV has a stick welding functionality that enables you to make high-quality industrial level welding. With both automatic and manual pre-flow the setup process is greatly simplified. If you buy an aluminum fuel tank this welder can give you the best welding experience than any other in the market.

Although it claimed to be backed up by a 5000-watt generator, the best output you can have with a maximum 4500-watt generator. The Everlast PowerTig 185DV comes with a 5 years long official warranty so, it is the perfect welder for a beginner that will severe you for a longer period of time.

Key Feature & Specifications

  • Dimensions: 12.5 × 7.25 × 19 Inches
  • Weight: 35 LBS
  • OCV: 68 Volt
  • Input Power: 110V / 220 V @ 50/60 Hz
  • AC Frequency control: 20-250 Hz
  • AC Balance Control: 10-90% of EP
  • Efficiency: 85%
  • Post Flow: 0-10 Seconds 
  • Output Current: 5-120 AMP @ 110V, 20-185AMP @ 220V
  • Duty Cycle: 35% to 60% 
  • Warranty: 05 years

Pros

  • Suitable for AC-DC TIG and Stick welding
  • Lightweight and advanced inverter welder technology used.
  • Adjustable time and AC frequency control
  • Perfect suit for a 4500-watt generator
  • Swift start and a beginner-friendly control mechanism

Cons

  • No foot pedal included.
  • Doesn’t have a DC pulse control
  • The hose is not as reliable as it should be

6. AHP AlphaTig 200x

If you are solely interested in TIG welding and nothing else and you want to run a smooth career on that then the APH AlphaTig 200x is one of the better options for you in the current market. The welder might seem old for the current industry standard but it still gives the best value to the beginner welders. That is why it’s in the sixth position on our list of the best welder for beginners.

APH_AlphaTig_200x

The 2020 version of  APH AlphaTig 200x runs on AC frequency so it’s a lot efficient than its previous ancestors. This welder can weld ¼ inch thick aluminum and ⅜ inch mild steel on both 110 and 220 volts. It is also a 6013 and 7018 electrode rod capable welders. 

The APH AlphaTig 200x uses an advanced pulse width module technology which amplifies its performance with Pulse and Stick welding. Overall it’s an excellent choice for a wire-feed welder and easy to recommend welding machine for the beginners. 

Key Feature & Specifications

  • Dimensions: 30 × 12 × 24.5 inches
  • Weight: 67 LBS
  • Input Power: AC 110V-220V @ 50/60 Hz
  • Voltage: 50-80
  • AC Balance: 20-80%
  • Post Flow: 1-10 Seconds
  • Pulse Frequency: 0.5-5 Hz
  • Output Current: 10-200 AMP
  • Efficiency: 80%
  • Duty Cycle: 30% to 70%
  • Warranty: 03 years.

Pros

  • Suitable for TIG, and Stick welding
  • One of the best-valued welder for the money
  • Beginner-friendly and easy to use interface
  • Option to choose different Arc length for your needs.
  • Smooth run and noise-free welding experience
  • Added pulse feature 

Cons

  • The foot pedal is not very good.
  • You might get confused with AlphaTig 200X and AlphaTig200 as both are on the same verge of selling.

7. Forney Easy Weld 140 MP

Finally, in the seventh position, we have the Forney Easy Weld 140 MP.  It is capable of MIG, TIG, Stick welding in general. The easy user interface and the beginner-friendly portfolio has given it the number seven position on our list of the best welder for beginners. 

Forney_Easy_Weld_140_MP

It’s an all-metal case but light enough to use it for your day-to-day use for various projects. It has a flux-cored capability which is not common at this price range. If you are a beginner or just wishing to start with a low budget welder, then the Forney Easy Weld 140 MP is the best welder you can get on the market as of today.

Overall the Forney Easy Weld 140 MP is a great choice to go for your initial startups, but the welder only comes with one year of warranty. So, if you are planning for an industrial level welding then it’s probably not the ideal choice for a higher power welder.

Key Feature & Specifications

  • Dimensions: 14.19 × 19.31 × 11.61 Inches
  • Weight: 24.81 LBS
  • Input Power: 120 Volt
  • Input Phase: 1
  • Current Type: DC
  • Output Current: 43-110A
  • Output Voltage Range: 12-23 Volt
  • Wire Feed Speed: 79-197 IPM
  • Glass less Wire: 0.030 / 0.035 Inches
  • Duty Cycle: MIG 30% @ 90A, TIG 30% @ 110A, and Stick 30% @ 80A
  • Warranty: 01 year

Pros

  • Capable of MIG, TIG, Stick and Flux-cored welding
  • Compact, lightweight, sturdy and easy to operate
  • Optimizable cored wires and smart features enabled
  • Good wire feed speed control and infinite voltage settings.
  • Beginner friendly and low skill caped 
  • Do not need any gas cylinder to operate

Cons

  • Doesn’t have a foot pedal
  • Doesn’t come with a TIG Torch
  • Has a low duty cycle
  • Doesn’t come with a gas hose or a regulator

Buyer’s Guide: Find the best welder for you

Buyers Guied for best welder for beginners

Before you listen to anyone’s suggestion or get impressed by someone’s review of a particular welder, here are some very important issues you must consider. It doesn’t matter what path you choose or which brand of welder you like, you should know what to look for before making a purchase.

What kind of Welder do I need?

There are several types of welders in the market and no welder can fulfill all your desires. You would have to determine what kind of jobs or projects you are willing to do. Whichever you take whether its MIG, TIG, Stick, Gas, or Plasma, you would need to buy specific welder for that project. There are multiprocessor welders, but they also specific in some sectors.

Learning to weld is easy but you need years of practice to get close to perfection. But if we were to suggest the perfect welder for you, we would go with ESAB Rebel EMP 215ic for the most futuristic performance. It will surely serve you for a long period of time and it’s a multi process welder, and as a beginner, you would want to experience every kind of welding experience before finding your sweet spot. 

However, if you are short on budget and you are not sure if you’re going to change your decision of becoming a welder, we suggest you go with Forney Easy Weld 140 MP, which is the cheapest welder in our list.  It’s easy controlling, cheap and you can easily use it for the household projects if you feel like it. 

Duty-Cycle

If you are just a beginner, there is no maximum value but you should aim for at least 25% for TIG welding and 30% for MIG welding.

Rated Output

Rated output is the Voltage and AMPs that the power source will provide on a single duty-cycle period. The more, the better.

Arc

Whichever Arc contaminates less, is the better. But the modern generation welders don’t contaminate as much as it used to be for its cored arc welding technology. 

Electrode

Welders that supports 6011, 6014, 7014, 7014 electrodes are standard on the current industrial market.

Flux

The coating on welding rods and flux-cored welding wire contains the flux. Welding wire must have a flux in the core.

Shielding Gas

Shielding gas is a combination of CO2. The welder must have it for protection from thicker metals.

Wire Feed Speed

It’s the speed of the amount of filler metal into the weld. Ensure the wire speed is adjustable on the welder before making a purchase.

Spatter

Spatter depends on the quality of welding but you must ensure a welder with spatter resistance spray for the minimum spatter on the workspace and a clean weld.

Slag

Flux leaves a cloud of carbon dust on the welder which contaminates the weld. Ensure the slag is removable on the welder for a longer life cycle of the welder.

Torch

A Torch is essential for TIG welding. Some welder comes with it but you can always buy a spare copy.

Tungsten

Tungsten is a high-grade metal used for TIG welding, not many welders come with it. But it’s nice to have one.

Frequently Asked Questions (FAQ)

Here we have answered some of the most frequently asked question on the welding community about being a welder for the beginners, about the opportunities and the draw backs.

What Type of Welder is the Cheapest?

There are several types of welding. MIG, TIG, Plasma Arc, and Gas welding. Each type has cheap welders and very expensive welders. It all comes to your need and your area of work. If you are working on an industrial project, then a cheap welder will never deliver your expectations. On the other hand, if you are a hobbyist welder an expensive welder is an overkill for you.

But for the most part MIG welders are comparatively cheaper in terms of money, but they also give significantly less power compared to TIG or Stick welders.

What are the different types of welding?

Although we mostly know and are familiar with MIG and TIG welding there are basically five types of welding that you can have a career path on and have experience in the general welding process

  • MIG Welding
  • TIG Welding
  • Stick Welding
  • Plasma Arc Welding
  • Laser and Electron Beam Welding

Among these Electron Beam and Laser welding is the most expensive and highly paid welding options. You don’t get this welding in day to day life, it is extremely precious and extremely dangerous. 

What is needed to start welding?

The first thing you need is to choose a method of welding. Whither its MIG or TIG, you would have to buy a proper welder for that particular project, the right shielding gas, wear the safety glasses, work boots, and other safety equipment as well as a good auto-darkening welding helmet

After that, you need to prepare the workspace, remove oil and dust from the weld, grind the edges, and position the metals. Make the body and hand position like playing golf and make the weld with a steady hand. Make sure to grind your weld afterward for a better-looking finish.

What type of welding makes the most money?

Welding jobs tend to pay a lot as it requires a lot of skill, knowledge, and experience for a perfect finish. However, the payment of welder can vary from time to time and location to location. On a typical American economy, a welder can be for approximately $8 to $100 an hour depending on the welding project and location. There are a lot of high paying projects out there in the world, but here’s the top five paying welding jobs in the market right now:

  • Shipbuilding Welder
  • Military Support Welder
  • Underwater Welder
  • Certified Welding Supervisor
  • Energy & Mine Welding

What is a Certified Welder?

A certified welder (CW) is a tested welder to have a mass amount of experience in structural steel, sheet metal, petroleum pipelines, and chemical refinery welding industries. It is a long process of tests and workshops for the pro welders to participate and perform. 

The tests are taken by AWS – American Welding Society and the AWS certification remain valid for six months after you pass the test and then you have to submit your certification maintenance every six months to maintain validly. 

How to Become a Certified Welder?

Anyone with welding skills can apply for the certification. It’s purely a performance-based certification so you do not need to attend any prerequisite courses, any prior testing, or you don’t even need any academic qualifications to enroll for the test. You just need to be able to do the necessary weld to pass the test and you will be eligible to become an AWS certified welder. 

Final Words

So, if you have come this far, then we hope you have got a good understanding of what to expect from welding and what to get to be very good at it. We tried to suggest to you the best welders you can have on today’s market and make a good career path ahead. But if you have decided to make that journey, be sure to remember that a welder is just a tool, its the knowledge, skill, and the expertise is what you get paid for. So, be sure to weld more and get learn the best skills in welding. Our blogs will certainly be a great help for you on that.

  • Leave a Comment

Get more stuff

Subscribe to our mailing list and get interesting stuff and updates to your email inbox.

Thank you for subscribing.

Something went wrong.